Side Panel And Bracket installation
"Side Mount" attachment process-
- Install the brackets
- Position the Mouse Paw and secure straps
- Adjust height and insert screws
- Pull straps tight
Tools Needed:
- Power or Cordless Drill with phillips head bit/driver.
Contents:
- Mouse Paw
- 2- Mounting Brackets and screws
- 4- foam spacers- (use as needed )
- 2- screws for side panel / bracket attachment.
Installation Step 1- Start by placing your chair on its side or upside down.
Install mounting brackets on underside of armrest. Position brackets to be flush with outside of arm rest. Drive the screws. Brackets should be solidly attached.
Step 2- Place the Mouse Paw on chair, pull the straps through the buckles and tighten to a very snug fit. For best results pull strap down and away.
Step 3- Position the Mouse Paw into the desired position.
Drive the screws through the side panel into the mounting brackets.
Finish by Pulling the straps very tightly then tuck the strap ends away. |
